Auxiliaries |
|
|
Applications:
- Controls shedding of secondary or non-essential loads such as heated water tanks or under floor heating, during high demand periods
- Assists with demand side management and allows existing reticulation to accommodate additional consumer appliances. Prevents nuisance tripping of overloaded circuit breakers
|
|
|
Applications:
Residential and commercial use
|
|
|
Applications:
- Commercial and Industrial
|
|
|
Applications:
- Residential
- Commercial
- Industrial
|
|
|
Applications:
- Flush mounted board for housing circuit breakers, switch disconnectors and earth leakage units
|
|
|
Applications:
- Modular system used for the mounting and connection of Q Range plug-in circuit breakers
- Allows rapid replacement of circuit breakers
|
|
|
Applications:
- Provides safe low voltage power for doorbells
|
|
|
Applications:
- Provides frequent duty cycle switching of higher current circuits
|
|
|
Applications:
- Controls shedding of secondary or non-essential loads such as heated water tanks or under floor heating, during high demand periods
- Assists with demand side management and allows existing reticulation to accommodate additional consumer appliances. Prevents nuisance tripping of overloaded circuit breakers
|
|
|
Applications:
- The SXDB is a 220/250V mains feed protection weatherproof distribution box
- Accepts a single pole SX circuit breaker
|
|
|
Applications:
- Accepts up to 3 single pole SF & SX breakers for the protection of the overhead line and service cable to the consumer
|
|
|
Applications:
- The STI has a special circuit breaker fitted for the protection street lighting circuits
|
|
|
Applications:
- Incorporates daylight switches and circuit breaker protection for street light circuits
|
Accessories |
|
|
Applications:
- For mounting of clip-in Q and S range MCB's and auxiliary products
|
|
|
Applications:
- This plate facilitates the installation of a mini rail to an existing Fuchs clip tray
|
|
|
Applications:
- This plate allows for the installation of Q and S Range MCB's into the old CF tray (Heinemann clip tray). It is not suitable for installation of Q and S Range MCB's when installed into the Fuchs clip tray(mounting of MCB's is inhibited by the yellow posi-clip)
|
|
|
Applications:
- The type QAN neutral bar can be conveniently clipped into the mini rail mounting facility to provide additional neutral connections. This enables each neutral conductor to be connected to, or removed from, the neutral bar without disturbing the connection of any other neutral. Can only be fitted onto a mini rail
|
|
|
Applications:
- used to lock types SA, SF, SH and SX MCB operating handles in the 'OFF' or 'ON' positions. All circuit breakers will retain their trip features
|
|
|
Applications:
- To close up a 26mm wide space in a mini rail panelboard
|
|
|
Applications:
- To close up blank 13mm spaces in a mini rail panelboard
|
|
|
Applications:
- Used for surface mounting the type SA, SF and SH circuit breakers
|
|
|
Applications:
- Used to cover surface mounted MCB's thus preventing accesstothe terminal. A sealing facility is provided for sealing with a 'plumb wire'
|
|
|
Applications:
- Used to loop MCB's when the conductors are too large for both to fit into the same terminal
|
|
|
Applications:
- For connecting lug type connections to MCB types SA, SF and SH
|
|
|
Applications:
- For single-phase loop connection of MCB's
|
|
|
Applications:
- For three phase loop connection of MCB's
|
|
|
Applications:
- The terminal cover slips onto the breaker housing to prevent tampering with terminals, for use on the SX circuit breaker
|
